Home | Product overview | BONACLEAN

BONACLEAN

USE FOR

• Removing limescale/calcium deposits from floors and walls, ideal for use wet floor areas ie.  poolside, changing rooms, showers and bathrooms
• Removing ingrained soiling and most external and internal foot traffic contamination
• Dissolving soap and grease residues, bodyfats to swimming pools, spas and shower areas
• For use on ceramic tiled floors, altro floors and ceramic wall tiles
• Removes grout residues, cement films, efflorescence, rust and chalk deposits

ADVANTAGES

• Removes calcium deposits and will restore the original surface texture and appearance of floor tiles without damaging the original substrate, grouting compound or fixing agents
• Odourless and easy to use on floors and walls
• Combined descaler and detergent for all acid resistant surfaces
• Completely miscible with water
• Easy to use with all professional floor cleaning machines, can be used manually with floor pads and brushes
• May be used as a periodic deep cleaner and light maintenance cleaner for removal of limescale/calcium

USAGE

Dilution: Use undiluted for deep cleaning and up to 1:5 for mild cleaning depending on the type of dirt to be removed.

Before Use: Always test a small area first to achieve desired result.
Bonaclean may not be suitable for acid sensitive surfaces such as enamel, zinc, polished and unsealed marble and decorative finishes (Refer to Bonadecon alkaline cleaner)

Application: Floors

1. For removal of visual limescale/calcium build-up. Use undiluted
2. Apply evenly to dry floor using a spray or sprinkler (Ideally a watering can fitted with a fine rose)
3. Agitate/scrub product into the surface using a floor pad or brush either by hand or floor scrubbing machine
4. Leave Bonaclean on surface for 5-10 minutes to allow product to soak into limescale deposits and continue scrubbing/cleaning process
5. Rinse off thoroughly with fresh water into normal drainage (for poolside floors wet vacuum dirty residue and water rinse)
6. If some areas are still dirty, repeat the clean to achieve the desired result
7. For improved results power wash floor, if suitable to the location
8. To maintain the floor areas use Bonamain Plus MRSA as your daily maintenance cleaner and sanitiser

Application: Walls

1. For removal of visual limescale/calcium build-up. Use undiluted
2. Use Bonaclean 1 litre trigger sprays
3. Spray or sponge evenly to wall surface.  Agitate with white or red polypropylene tile cleaning pad.  Lightly scrub grout lines
4. Rinse off thoroughly with fresh water
5. To maintain the wall areas use Bonamain Plus MRSA as your daily maintenance cleaner and sanitiser

DILUTION/COVERAGE

Precautions
Not recommended on glossy or polished marble and in general on acid sensitive materials such as (dark slate)
Before cleaning surfaces patch test a small area for resistance to product

COMPOSITION

Nitric Acid less than < 5%

LABELLING

Hazard Identification: None

Risk Phrases: Not classified

Safety Phrases: Keep locked up and out of reach of children. In case of contact with eyes rinse immediately with plenty of water, If irritation persists seek medical advice. Do not mix with other chemicals. Wear suitable protective clothing.

Refer to safety data sheet for further information

TECHNICAL INFORMATION

Appearance: Clear
Odour: Low
pH: 2.1 in (con) – pH + 4 in dilution

Density:  5ltr containers
Solubility: Miscible with water
Flammability: Not flammable

SUPPLEMENTARY INFORMATION

The above information is based on the present state of our knowledge of the product at the time of publication. It is given in good faith; no warranty is implied with respect to the quality or specifications of the product. The user must satisfy him/herself that the product is entirely suitable for the purpose.